Trouble Shooting Guide
Arming/Disarming System
- Doors/Windows – Turns on all doors and perimeter protecting sensors.
- Doors/Windows and Motions – Turns on all doors, perimeter protecting sensors and motion detectors.
- Disarm – While armed enter the Master Code to turn the entire system Off.
Changing Master Code
- Scroll to “System Programming” (press enter) then enter the Master Code (1234)
- Scroll to “Access Codes” (press enter)
- Scroll to “Master Code” (press enter)
- Enter your new code (press enter)
- Press status until time appears on the screen.
Emergency Duress Code
In case of immediate emergency only, where you are being forced to disarm the system.
· 2-5-8-0 then disarm
Panic Buttons
Press any one of the needed panic buttons twice to activate an emergency call.
Chime
- Scroll to the Chime option (press enter)
- Select Chime On (press enter)
Bypass
- Press doors/windows and/or motions
- Press bypass
- Enter code and scroll up to find the zone/s you want to bypass (press enter)
- Press Status
System Test
- Scroll to “System Test” (press enter)
- Enter master code (press enter).
- Scroll to “Sensors” (press enter)
Go to each protected door and window and open and close them, walk in front of the motion detectors and tap on the glass break. They should all beep to let you know they are working.
Status Button
When the status button is lit up, it means a door or window is open, or that the motion detector is sensing movement. Press the status button twice to find out the exact location of the fault.
Clear History
Press “Status” then “Disarm”. This will clear the alarm history on the LCD screen.
If the issue you were seeking answers for cannot be found in this guide, please download our user manual found on the sidebar menu on the left side of the screen.
